Currently is is possible to use only radio-buttons to choose should this field be shown/hidden and etc. But in reality we may have a situation that this particular field on a step Completed should be hidden+Required or Disabled+Required that currently it is not possible to set using radio-buttons. May advice you to switch from radio-buttons to check-boxes and the mission will be completed. So not a big deal, but that will make eveybodys lives easier. en-US(C) Copyright 2006-2026 Inflectra Corporation.support@inflectra.com/Computers/Software/Project_Management//Computers/Software/Quality_Assurance/KronoDesksupport@inflectra.comhttp://www.inflectra.com/kronodesk/forums/threads120/Support/Forum/spirateam/issues-questions/2534.aspxthreadId=2534Ilia Poliakov (ilya.polyakov@edetek.com)proposal workflow fields Currently is is possible to use only radio-buttons to choose should this field be shown/hidden and etc. But in reality we may have a situation that this particular field on a step Completed should be hidden+Required or Disabled+Required that currently it is not possible to set using radio-buttons. May advice you to switch from radio-buttons to check-boxes and the mission will be completed. So not a big deal, but that will make eveybodys lives easier. Mon, 15 Nov 2021 08:52:20 -05002022-01-19T08:21:10-05:00/Support/Forum/spirateam/issues-questions/2534.aspxmessageId=4191David J (adam.sandman+support@inflectra.com) It used to be checkboxes, but it does not make sense because hidden + required does not work (for example) so we switched them to radio buttons to avoid people making contradictory settings. Mon, 15 Nov 2021 16:23:34 -05002021-11-15T16:23:34-05:00/Support/Forum/spirateam/issues-questions/2534.aspx#reply4191messageId=4192Ilia Poliakov (ilya.polyakov@edetek.com) David, it works: Disabled+Required means that it should be filled during previous workflow step, but can not change on a current. For example, at Complete status you can not change actual effort as it was reviewed by project manager, but you need to filll it previous stage. Hidden + required is about the same. You need to fill a value before a transition goes but you dont need to see it as it used only in custom reports. Tue, 16 Nov 2021 03:43:32 -05002021-11-16T03:43:32-05:00/Support/Forum/spirateam/issues-questions/2534.aspx#reply4192messageId=4194David J (adam.sandman+support@inflectra.com) It doesnt work because the setting only applies for the destination status. Thats why we switched them to radios. Tue, 16 Nov 2021 23:23:15 -05002021-11-16T23:23:15-05:00/Support/Forum/spirateam/issues-questions/2534.aspx#reply4194messageId=4195David J (adam.sandman+support@inflectra.com) So make the field required for Status A and hidden for Status B. That will do the same thing. where A --> B Tue, 16 Nov 2021 23:24:03 -05002021-11-16T23:24:03-05:00/Support/Forum/spirateam/issues-questions/2534.aspx#reply4195messageId=4196Ilia Poliakov (ilya.polyakov@edetek.com) It doesnt work because the setting only applies for the destination status. And it will work: such settings Disabled+Required will prevent us from the transition till the field is filled. Example: From In Progress status I am trying to move to Completed (where Disabled+Required). Till the field is filled is wont allow us to go there as the field is Required After we move there and status is Completed, a field will be read-only. Thats what I need! Try please, it works separately, behaviour is as I wrote, but I need both options. Wed, 17 Nov 2021 04:22:57 -05002021-11-17T04:22:57-05:00/Support/Forum/spirateam/issues-questions/2534.aspx#reply4196messageId=4251Ilia Poliakov (ilya.polyakov@edetek.com) Are there any news when it is going to be implemented? Wed, 19 Jan 2022 08:21:10 -05002022-01-19T08:21:10-05:00/Support/Forum/spirateam/issues-questions/2534.aspx#reply4251